Ask Dave Dunipace About Innova Discs - Page 351

davei · Dec 19 2009, 08:56 AM

Quote:

Originally Posted by gokayaksteven

Dave-
what is the story of the discmania PD mold? is it a combo of some other molds? what discs share the same rim width?
thanks

DGDave is essentially correct.

20460chase · Dec 19 2009, 10:58 AM

Quote:

Originally Posted by discette

The Echo Star TeeBirds were available for West Coast custom orders while the discs were in queue for hot stamping. The entire West Coast inventory has been stock stamped and have been available to all customers for the past week. The discs for East Coast are still waiting to be shipped and likely won't be available from them until mid-January.

Thats wrong. You should be allowing everyone to order from the West then, or they shouldnt be released. Total BS.

johnbiscoe · Dec 19 2009, 11:29 AM

Quote:

Originally Posted by davei

I threw about 360 ft with an Aviar (end zone to end zone). Craig Leyva could/can throw 400ft or more. So can Avery. I think Dave Griffin was a 400ft Aviar thrower too.

Sam did roll an Aviar that far, but it was on a dry lake bed and would have gone farther if he had started farther back. The rollers will often roll to the end of the lake bed. I am sure he could have rolled a half mile or more.

i thought it was randy lahm who threw the monster aviar roller.

citysmasher · Dec 19 2009, 01:04 PM

Please do a run of Pro Orcs. Thanks.

Drew32 · Dec 19 2009, 01:30 PM

Quote:

Originally Posted by 20460chase

Thats wrong. You should be allowing everyone to order from the West then, or they shouldnt be released. Total BS.

So what your saying Innova should press a new disc and wait till it has shipped to both branches before any sales? They could always ship to the East first then the West.

8)

AviarX · Dec 19 2009, 08:27 PM

Quote:

Originally Posted by citysmasher

Please do a run of Pro Orcs. Thanks.

maybe we could all pitch in $50 for 5, and then have at least 500 made. That would only take 100 of us. There are surely more of us who miss the Pro Orc. I threw distance once and got 149 meters (489 ft) with a Pro Orc (Pro Worlds 07). It went about 540, but to my dismay only air distance counted.

Blue Pro Orcs please!

Dave what would be the minimum order to get a run of Pro Orcs?

davei · Dec 20 2009, 08:36 AM

Quote:

Originally Posted by AviarX

maybe we could all pitch in $50 for 5, and then have at least 500 made. That would only take 100 of us. There are surely more of us who miss the Pro Orc. I threw distance once and got 149 meters (489 ft) with a Pro Orc (Pro Worlds 07). It went about 540, but to my dismay only air distance counted.

Blue Pro Orcs please!

Dave what would be the minimum order to get a run of Pro Orcs?

Too many, I think. I did offer the Pro (Millennium) Orc to John H, but he wasn't interested. That would be a way to get it back into production.

We would like to offer every disc we have ever made, but it is not feasible in terms of molding time and storage space.

AviarX · Dec 20 2009, 09:12 AM

Quote:

Originally Posted by davei

I did offer the Pro (Millennium) Orc to John H, but he wasn't interested. That would be a way to get it back into production.

A Millenium Pro Orc... If that happened would not the Champion Orc and Star Orc overlap with the Q and Sirius Millenium versions? Or would John Houck/Millenium only be given the Pro (standard Millenium plastic) version?

Isn't the Orc inbetween an Orion LS and an Orion LF?

I'd suggest the Pro Orc as a fundraiser but realize it can't compete with the Roc...

The Star Valk and Star Beast seem close to a Pro Orc... (?)

- - - -

Dave you are getting very sleepy... repeat after me: I must make Pro Orcs... I must make Blue Pro Orcs... I must make-it-so...

- - - -

i will say the Destroyer has pretty much been my 'help-me-Rhonda' in terms of my missing shiny new Pro Orcs.

PS: Thank you for all you have done and do for disc golf.

citysmasher · Dec 20 2009, 11:13 AM

Quote:

Originally Posted by davei

Too many, I think. I did offer the Pro (Millennium) Orc to John H, but he wasn't interested. That would be a way to get it back into production.

We would like to offer every disc we have ever made, but it is not feasible in terms of molding time and storage space.

Make it a CFR. I think it would definitely do better than Champion Vipers...

If Houck doesn't want it, how do I get the rights to it? Like Discmania, etc.

AviarX · Dec 20 2009, 02:47 PM

Quote:

Originally Posted by citysmasher

If Houck doesn't want it, how do I get the rights to it? Like Discmania, etc.

you are not the first person to have asked Dave that question

chrispfrisbee · Dec 21 2009, 12:07 PM

Dave,

Three questions:

When can we expect a Champion Katana for CFR production?

Will there be CFR Glow Teebirds and Firebirds (regular mold, not -L molds) available soon at East Coast?

Is it possible for A-Tiers to get special models for CFR that B-Tiers cannot get and so on?

Looking forward to selling some discs for the Atlanta Open A-Tier and the EatSleepDisc.com Autumn Open A-Tier. Innova by far has been the best sponsor, supporting my events through CFR pricing for disc sponsor sales.

davei · Dec 21 2009, 12:44 PM

Quote:

Originally Posted by chrispfrisbee

Dave,

Three questions:

When can we expect a Champion Katana for CFR production?

Will there be CFR Glow Teebirds and Firebirds (regular mold, not -L molds) available soon at East Coast?

Is it possible for A-Tiers to get special models for CFR that B-Tiers cannot get and so on?

Looking forward to selling some discs for the Atlanta Open A-Tier and the EatSleepDisc.com Autumn Open A-Tier. Innova by far has been the best sponsor, supporting my events through CFR pricing for disc sponsor sales.

We should start making Champ Katanas in January for CFR.

We have no stock of either CFR Glow TeeBirds or Firebirds on either coast. Neither is currently scheduled for production.

Special models are usually only available for majors and NTs. And not even necessarily for those. We decide on a case by case basis. Contact East Coast for your event.

20460chase · Dec 21 2009, 12:49 PM

Quote:

Originally Posted by Drew32

So what your saying Innova should press a new disc and wait till it has shipped to both branches before any sales? They could always ship to the East first then the West.

8)

I dont know, I just know Im sick of seeing specialty and even new release discs on Ebay and on other websites that I have no access to and have to lose business over it. I appreciate thier products, just not the way they choose to distribute them, I suppose is the nicest way I can put it.

Drew32 · Dec 21 2009, 05:14 PM

Will there be a run of Champion Makos for CFR also? At least by February when the East Coast gets the Katanas?

Trey133 · Dec 22 2009, 08:19 PM

Hey Dave,

Latitude 64 has recently got their new Halo driver down to 164 grams in their opto plastic. Assuming that opto is pretty much champion plastic, what do you think is allowing them to get their driver thats very similar to the boss spec wise down in weight so much?

Whats holding innova up? I'm pretty sure with that speed and weight a champ boss could crush at 164 grams.

DSproAVIAR · Dec 23 2009, 10:55 AM

Dave,

Now that you have the Echo Teebird molded, what are the plans for an Echo Firebird?

davei · Dec 23 2009, 11:17 AM

Quote:

Originally Posted by Drew32

Will there be a run of Champion Makos for CFR also? At least by February when the East Coast gets the Katanas?

Champion Makos will be main stream when we make them.

davei · Dec 23 2009, 11:18 AM

Quote:

Originally Posted by DSproAVIAR

Dave,

Now that you have the Echo Teebird molded, what are the plans for an Echo Firebird?

We haven't make any plans regarding the Echo Firebird as yet.

ChrisEads · Dec 23 2009, 12:03 PM

Is there any chance that a test run has been already made of the echo firebirds because I know a guy who has a firebird that is the green plastic and he got it off of one of the innova team members and they told him it was an echo firebird.

chrispfrisbee · Dec 23 2009, 02:11 PM

Thanks Dave.

One more question:

On the East Coast order form it has Star Bosses at 150 Class as out of stock, when do you anticipate to make/ship more our way?

Thanks,
ChrisP.

davei · Dec 23 2009, 05:24 PM

Quote:

Originally Posted by ChrisEads

Is there any chance that a test run has been already made of the echo firebirds because I know a guy who has a firebird that is the green plastic and he got it off of one of the innova team members and they told him it was an echo firebird.

We probably made some test shots, but I rember them being domey. We didn't want domey Firebirds so we stopped.

davei · Dec 23 2009, 05:25 PM

Quote:

Originally Posted by chrispfrisbee

Thanks Dave.

One more question:

On the East Coast order form it has Star Bosses at 150 Class as out of stock, when do you anticipate to make/ship more our way?

Thanks,
ChrisP.

That is a glitch in their order form. There is no such thing as 150 Star Bosses. They occasionally go down to 166gms.

20460chase · Dec 24 2009, 11:13 AM

Quote:

Originally Posted by davei

We probably made some test shots, but I rember them being domey. We didn't want domey Firebirds so we stopped.

When your making those flat Firebirds, could you throw some FLs in there?

pterodactyl · Dec 24 2009, 11:27 AM

Thank you Dave and all your elves at Innova for the Christmas disc. KL

the_kid · Dec 24 2009, 05:10 PM

Dave, a guy on another board was asking for someone to identify the 2007 GSC disc.

Looks fairly stable and is in a dark champion plastic and I was thinking either a Teerex or Max but I don't really remember if the max came out in 06' or 07'.

keithjohnson · Dec 24 2009, 09:28 PM

Quote:

Originally Posted by the_kid

Dave, a guy on another board was asking for someone to identify the 2007 GSC disc.

Looks fairly stable and is in a dark champion plastic and I was thinking either a Teerex or Max but I don't really remember if the max came out in 06' or 07'.

Mine is a T-rexX

andyn · Dec 25 2009, 01:30 PM

Any chance of these in 2010?

davei · Dec 26 2009, 09:21 AM

Quote:

Originally Posted by andyn

Any chance of these in 2010?

Yes, they are a regular item.

two5twosix9 · Dec 26 2009, 08:28 PM

Could you please screw up your next 19 runs of any discs in star plastic so you can run echo runs of everything? Thanks!
Is it possible to run echo champion? Is the echo a mix of both? Could you do that? I like the echo plastic, obviously.

davei · Dec 26 2009, 11:00 PM

Quote:

Originally Posted by two5twosix9

Could you please screw up your next 19 runs of any discs in star plastic so you can run echo runs of everything? Thanks!
Is it possible to run echo champion? Is the echo a mix of both? Could you do that? I like the echo plastic, obviously.

Echo is a mix of both.

Dec 21 2009, 12:07 PM	#10511
chrispfrisbee PDGA Member Join Date: Aug 2004 Location: Comin\' to an event near you.. Posts: 843	Dave, Three questions: When can we expect a Champion Katana for CFR production? Will there be CFR Glow Teebirds and Firebirds (regular mold, not -L molds) available soon at East Coast? Is it possible for A-Tiers to get special models for CFR that B-Tiers cannot get and so on? Looking forward to selling some discs for the Atlanta Open A-Tier and the EatSleepDisc.com Autumn Open A-Tier. Innova by far has been the best sponsor, supporting my events through CFR pricing for disc sponsor sales. __________________ eatsleepdisc.com Last edited by chrispfrisbee; Dec 21 2009 at 12:16 PM.

Dec 23 2009, 12:03 PM	#10519
ChrisEads PDGA Member Join Date: Jan 2008 Location: Arkansas Posts: 464	Is there any chance that a test run has been already made of the echo firebirds because I know a guy who has a firebird that is the green plastic and he got it off of one of the innova team members and they told him it was an echo firebird. __________________ WAFDA Tag #1 Pleasant View Tag #2 DAD TAG #2(Sugga Daddy)

Dec 23 2009, 02:11 PM	#10520
chrispfrisbee PDGA Member Join Date: Aug 2004 Location: Comin\' to an event near you.. Posts: 843	Thanks Dave. One more question: On the East Coast order form it has Star Bosses at 150 Class as out of stock, when do you anticipate to make/ship more our way? Thanks, ChrisP. __________________ eatsleepdisc.com

Dec 24 2009, 11:27 AM	#10524
pterodactyl PDGA Member Join Date: Nov 2003 Location: Is everything Posts: 2,715	Merry Christmas Thank you Dave and all your elves at Innova for the Christmas disc. KL __________________ Don't hate me because I'm www.TWISTEDflyer.com!

Dec 24 2009, 05:10 PM	#10525
the_kid PDGA Member Join Date: Nov 2003 Location: Livingston(Hicksville),Tx Posts: 7,285	Dave, a guy on another board was asking for someone to identify the 2007 GSC disc. Looks fairly stable and is in a dark champion plastic and I was thinking either a Teerex or Max but I don't really remember if the max came out in 06' or 07'. __________________ Southern Nationals - best events for players who like a true "Non-profit" and a real Finale www.Discraft.com

Dec 19 2009, 01:04 PM	#10504
citysmasher Community Member Join Date: Nov 2006 Location: Richardson, TX Posts: 479	Please do a run of Pro Orcs. Thanks.

Dec 21 2009, 05:14 PM	#10514
Drew32 PDGA Member Join Date: Mar 2006 Location: Lexington, Ky Posts: 397	Will there be a run of Champion Makos for CFR also? At least by February when the East Coast gets the Katanas?

Dec 22 2009, 08:19 PM	#10515
Trey133 PDGA Member Join Date: Jan 2009 Location: North Carolina Posts: 114	Hey Dave, Latitude 64 has recently got their new Halo driver down to 164 grams in their opto plastic. Assuming that opto is pretty much champion plastic, what do you think is allowing them to get their driver thats very similar to the boss spec wise down in weight so much? Whats holding innova up? I'm pretty sure with that speed and weight a champ boss could crush at 164 grams.

Dec 23 2009, 10:55 AM	#10516
DSproAVIAR PDGA Member Join Date: Sep 2005 Location: Skillet Posts: 2,506	Dave, Now that you have the Echo Teebird molded, what are the plans for an Echo Firebird?

Dec 25 2009, 01:30 PM	#10527
andyn PDGA Member Join Date: Nov 2003 Location: Wichita Falls, Texas Posts: 66	R-Pro Rhynos Any chance of these in 2010?

Dec 26 2009, 08:28 PM	#10529
two5twosix9 PDGA Member Join Date: Feb 2009 Posts: 135	Could you please screw up your next 19 runs of any discs in star plastic so you can run echo runs of everything? Thanks! Is it possible to run echo champion? Is the echo a mix of both? Could you do that? I like the echo plastic, obviously.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode