Club Workdays

[bgwvdave]

Awesome Scott! if i have said it once i have said it a thousand times D'cun you are the man!!! maybe we can get away with 5 and use the steps on the left side of the tee as one of the supports.

i have some different kinds of caulk and a gun. what do we need it for?

[bgwvdave]

i was thinking we could culk the seems of the boards we where building the reatinaing wall with to keep water from running threw. just a thought i am not poisitive it is totally neccesary (msp) but i figured it couldn't hurt.

cool, i'll bring it and we can decide whether or not its necessary.

[bgwvdave]

thanks DP!

[Hagan097]

Great job today fella's, 5 & 12 look great!

[jmonny]

Thanks Deac glad you made it out for dubs.

[Hagan097]

DG,

Do you have the peoples names and number of hours worked Sat? Thanks

[bgwvdave]

you have a p.m.

[Hagan097]

is Sat., February 16 at 9:00

[bgwvdave]

Sat. February 16th moving water if there is any and cleaning ditches. bring your hard rakes and a strong back. should be fun

TIME TO DO WERK

[bgwvdave]

Guys,
we have a workday this saturday at 9:00 a.m.. on the agenda are

1) Making the changes to and finalizing Phase 1 of the Hole 12 project
2) clearing ditches on the course to promote water flow in the event of hard rain

what we will need is pretty basic. we will need

1) multiple wheel barrows and shovels for the hole 12 project
2) lots of hard rakes for the ditch patrol

this work day should not be very long. if we have enough people we will break into groups. Hole 12 should take less than 1 1/2 hours. ditches could take all day but i think if we do it in stages we should be good. we may focus on the front 9 saturday and see where we are then think about a good stopping point.

all the help we can get would be greatly appreciated.

[Hagan097]

Thanks for the reminder, I had forgotten.

[bgwvdave]

Guys,
we have a workday this saturday at 9:00 a.m.. on the agenda are

1) Making the changes to and finalizing Phase 1 of the Hole 12 project
2) clearing ditches on the course to promote water flow in the event of hard rain

what we will need is pretty basic. we will need

1) multiple wheel barrows and shovels for the hole 12 project
2) lots of hard rakes for the ditch patrol

this work day should not be very long. if we have enough people we will break into groups. Hole 12 should take less than 1 1/2 hours. ditches could take all day but i think if we do it in stages we should be good. we may focus on the front 9 saturday and see where we are then think about a good stopping point.

all the help we can get would be greatly appreciated.

BUMP

[Hagan097]

Roll Call?

I'll be there from 9-12, have to leave at that time to get Haley signed up for softball b/4 2.

If we start on the front with ditches I think we should start with 9 & 6 followed by 7 & 8. With 8 just clearing out the large "damns" created by debris coming together and blocking free flow.

Also, has the organization of the ash tray signage been implemented? (maybe it already has been done-I haven't been out there for over a week and a 1/2).

See you in the morning.

Sat. February 16th moving water if there is any and cleaning ditches. bring your "HARD RAKES" and a strong back. should be fun

TIME TO DO WERK

BwD?

[jmonny]

You got any projects planned Silverback?

[bgwvdave]

starting at 9 ending around 12:30 so i can make the carolina game at 1. your Green hadled rake will be involved in this werk.

#4's ditch has the JaMMeRs name on it
see u around 9

Do'N WERK

[bgwvdave]

Jammin!! see ya out there

on another note, i had a great conversation with Wayne Moher the county parks superintendant on Thurday about getting some rock out at the park to put on the front of the teepads to address some of the eroison we are experiencing out there. he is going to take a look at a few of them and put some rock down on a few test areas to see how it works.

his concern (which is very valid) is that if we just dump some rock in front of the tee pads it might get strown all over the place. one idea he had was to build a frame to enclose it. now this might be necessary in a few places (hole 1 comes to mind) but probably not on all of them. so when we see it out there please fill free to give me any feedback you might have. if it works well we should haev no problem getting the materials we need.

[QUOTE]
Roll Call?

i'll be there. may try to play nine early.

[ashley]

parents in town, havent see nthem since xmas, and they kind of popped in... otherwise iwould be there early am.

[Hagan097]

Thanks to the following folks whom volunteered their time to better the Castle Hayne disc golf course on Sat., 2/16..... pretty work!

Rudy, Scoobs, ClayStone, DG, DP, D-cun, Monny, Cutt and CJ. My calculations have it at 29 hours of work was completed. Finalized hole 12's sandbag project and cleared blocked flow in ditch; dug out hole 9's trench for drainage; cleared hole 6's drainage ditch; cleared and cleaned hole 4's ditch and assessed and fixed OB.

[bgwvdave]

Great work this weekend guys!! good thing we did the front when when we did. man it poured last night. hard rain.

[MTL21676]

good job guys!!

can't wait to see the course!

[Hagan097]

Thanks MTL.

[bgwvdave]

Alright boys it is time to get out and do a little TTrimming. Bring your sheers your loppers your pole saws, hand saws and ladders bring it all. We gona do some cuttin. 9:00 is the time you kow the place. Bigger turn out means the faster things get done so pass the word. see everyone there.

[bgwvdave]

Alright boys it is time to get out and do a little TTrimming. Bring your sheers your loppers your pole saws, hand saws and ladders bring it all. We gona do some cuttin. 9:00 is the time you kow the place. Bigger turn out means the faster things get done so pass the word. see everyone there.

bump

[Hagan097]

Sorry fella's I will be unable to be at the workday on Saturday, 22nd. We are going out of town for the day.

[bgwvdave]

Bump