Club Workdays

[jmonny]

Tomorrow 11/17/07 is a club workday. 8 bells.

[Hagan097]

Great workday today fella's! Thanks to DP, Rudy, Fig, Ashley, Gabe, Russell and D-cun, 8 am to 11/11:30 X 7=23 hours of labor.

Trimmed holes 1-7 and sprayed
Moved tee sign on 7 and raked rock back up to the front of pad
Removed dead tree on 5
10 ash trays out
Trash picked up on front
and.....everyone but RootRoot got some golf in

[jmonny]

Good work guys. I woke up ill and couldn't find the strength to come out...sorry. Where is #7 tee sign now?

[Hagan097]

On # 9 ................................................ ..................nearer the bench

Sorry to hear you're ill Monny. I thought you might of gone to Durham

[Jamruss]

Actually, Root Root came back later and played some in the afternoon. So he got to enjoy some golf after a hard work day.

[bgwvdave]

we have a big workday coming up saturday and i am hoping to have a good turnout so we can knock this task out in time for doubles. here are a few special things i thought we will need to do this thing right. i am hoping some of you have
1) a string line
2) a level
3) Shovels (at least 3 or 4)

i know we have
1) post hole diggers - D'cun (would be nice to have 2)
2) Wheel Barrows - Monty, Fig, Russel
3) Sledge Hammer - Monty
4) Hammers - Monty

i will be bringing the lumber, Galvanized nails, and any other items we may need. also there was talk of Gabe's Auger which i will find out if we will have access to. anything else anyone can think of please post it here and lets get ready to DO WERK!

[bgwvdave]

also should we cement the verticle posts for the retaining wall in? i am thinking yes if so i will have to buy some crete. let me know thoughts

[26408]

I'm not gonna be able to make it this saturday, I'ts my saturday to work. But I will drop my tools off in the shed friday evening. Dave, concrete would'nt hurt but I dont know that it's necessary if the posts are put in the ground as deep as we talked about.

[gabesteil]

yeamatchuseeyouallthere

[bgwvdave]

Thanks to all that came out to the work day.
Gabe, Christian, Rudy,DG, Narehood, Hunter, Monty

Hole 1 looks great! Hole 6 should be flowing again

Stay Tuned for another little work day coming soon.

[bgwvdave]

Alright gang Summer is drawing to a close and the party is over...Time to get back to WERK!

9:00 a.m. Saturday Sept. 19th Workday

Hole 12 Project kicks back in
Flat and spade shovels
wheel barrows
Post Hole Digger
Brute strength / ignorance (goes a long way)

Build a few new bridges for hole 15
Screw guns
hammers
etc.

replace the matt on hole 8

check the website for details as well. the club website is back in full swing and will updated from here on out with all club activities as well as this discussion board. as always if anyone has any questions fill free to holla.

[gabesteil]

hey ive got a question?
thanks

[bgwvdave]

and that question is?? Holla sun.

[bgwvdave]

Originally Posted by bgwvdave

Alright gang Summer is drawing to a close and the party is over...Time to get back to WERK!

9:00 a.m. Saturday Sept. 19th Workday

Hole 12 Project kicks back in
Flat and spade shovels
wheel barrows
Post Hole Digger
Brute strength / ignorance (goes a long way)

Build a few new bridges for hole 15
Screw guns
hammers
etc.

replace the matt on hole 8

check the website for details as well. the club website is back in full swing and will updated from here on out with all club activities as well as this discussion board. as always if anyone has any questions fill free to holla.

Come join in the fun this weekend. we start at 9:00 then play dubbs at 1:00. we will be unable to start the hole 12 project because we will not have the sand in time. but everything else as well as a few other little things can go down for sure. if anyone has any questions holla

[bgwvdave]

Originally Posted by bgwvdave

Hope to see everyone there

we will have fun

[ashley]

Been so busy launching a charity for I helped start haven't had a chance to get on here or make it to any meetings etc. Wanted to say hi to all of the NHDGC and I haven't quit the game. LOL Would come to workday but the charity (www.amped4acure.org) is the charity for the COM festival (carolina original music) at OGDEN PARK saturday, so have crew coming from out of town to help with it....if anyone scoots out of doubles come to the festival.. bands, pizza "slice off" coolers allowed etc. (ibxpromotions.com has more info) but I am sure the course is looking great, we have a great group here. Will see you all soon on the course!

[bgwvdave]

Thanks a ton to all the people that showed up today we got work done!!

thanks to
Scott Crouch
Rudy Dixon
John Moncrief
Alan Layh
Brent Fig Newton
Josh
and
Drew P.

New Bridge was built fot hole 15 off the tee. Mat was replaced on hole 8, basket was reset on hole 17 and phase 2 has begun on hole 12. You guys are the best.

[bgwvdave]

Guys we will be having a work day this Saturday starting at 9:00 a.m.

Agenda
1) Build new section of the retaining wall on hole 12
2) Clear the ditch on Hole 12
3) Tie up broken tree on hole 5 by the basket
4) do some trimming of the fairways (if we have time and people)

Supplies Needed
1) Brute strength and iggnorance
2) Hard Rakes
3) Shovels
4) wheel barrows
5) Circular saw

tell all your freinds...work days are super fun

[bgwvdave]

Originally Posted by bgwvdave

Guys we will be having a work day this Saturday starting at 9:00 a.m.

Agenda
1) Build new section of the retaining wall on hole 12
2) Clear the ditch on Hole 12
3) Tie up broken tree on hole 5 by the basket
4) do some trimming of the fairways (if we have time and people)

Supplies Needed
1) Brute strength and iggnorance
2) Hard Rakes
3) Shovels
4) wheel barrows
5) Circular saw

tell all your freinds...work days are super fun

Hope everyone can make it. should be nice weather and doubles afterwards

[bgwvdave]

Originally Posted by bgwvdave

Hope everyone can make it. should be nice weather and doubles afterwards

HUGE Thanks to Rudy and DP for showing up to the work day. we got another 40 feet added to hole 12's retaingin wall and it looks great. we got the water moving on hole 12 as well.

we will have another work day real soon in december to finish back filling the new section we built and keep the wall going. stay tuned.

[snarewilm]

Big Wave,
Not sure how the sponsorship signs are going to be setup,but I'd like mine to say This hole sponsored by Scuba,Dee,Pinky,Lane and Roc.Thanks brother.

Scuba

[bgwvdave]

I got you Scuba!

[bgwvdave]

Guys we have a Workday weekend after next on
May 21st at 9:00 a.m.

We will be trimming the course
and spraying the fairways with weed killer

we can use Pole Saws if you have them and pruners.
we will meet at Hole 1

[bgwvdave]

We have a BIG workday coming up this weekend on Sunday Sept. 25th starting at 9:00 a.m.. We have a lot to get done so I am hoping to see a big turn out. please help pass the word and bring as many people as you can. The club will be providing lunch so join us for what should be a good time with a little work sprinkled in.

Agenda
1) Trim as many fairways as possible
2) Clean up debris on holes 6 and 7
3) Clear all ditches of debris and get the water moving
Equipments
1) Pole Saws
2) Ladders
3) Pruners
4) Loppers
5) Hard rakes
6) Brute strength and ignorance

[bgwvdave]

We have a Workday this weekend on Saturday Nov. 19th.
It starts at 9:00 a.m. and we will meet in the parking lot by hole 1
On the Agenda will be working on Holes 7 and 8 as well as installing two new mando signs for holes 2 and 9.
tools to bring are shovels, hard rakes, and wheels barrows if you have them
if not brute strength and willingness to do work will suufice.

See everyone saturday