PDA

View Full Version : 10 meter circle


sandalman
Nov 28 2002, 04:10 PM
when i played in AZ one winter, they always had a 10 meter circle around each pin position for the tourneys. it was really cool, actually, and i always wondered why the other places i've played (mostly cali and texas) do not do this. it defines the 10m rule and even looks cool. it seems like it would work really well for discTV.

do other locales practice the same thing? any ideas as to why it is not more of a standard?

rhett
Nov 28 2002, 04:16 PM
SoCal Disc Golf has been painting the 10m circle for SoCal Series events for the past couple of years.

ck34
Nov 28 2002, 04:33 PM
It takes 2/3 of a mile of paint to do solid 10m circles around just 18 holes. Not exactly good environmentally unless you use chalk or perhaps flour (expensive). It's also difficult to do properly on wooded holes not only physically working around trees but being able to mark wood chips well.

sandalman
Nov 28 2002, 06:12 PM
agreed that on wooded holes it more challenging. reasonably priced environmentally sensitive solutions probably exist... what do AZ and SoCal use?

bigchiz
Nov 28 2002, 06:23 PM
At the one annual B tier we use striping paint on our two tournament courses. The courses are mostly flat and open, it helps to dress them up a bit.

Nov 28 2002, 07:25 PM
It would be a huge help to us jump-putters...especially us that jump at 32'9"!!!

Nov 28 2002, 08:59 PM
it seems that something flush to the ground, like partially buried stones or something similar would make a cool looking 10m ring around a basket...

bschweberger
Nov 28 2002, 09:59 PM
I love the 10 meter circle because, I love to jump putt if at all possible.

sandalman
Nov 28 2002, 10:17 PM
stones are too permanent, and make movingthe basket a lot of work... strips of some sort degrade within days

Nov 28 2002, 11:01 PM
Hey Shweb, address that last comment directly to all my doubters...EW,CC,J.Markov...all have told me I was crazy to jump at every chance. It's like sex with a goat...IT JUST FEELS GOOD...no matter how it looks!!!

gnduke
Nov 29 2002, 12:03 AM
bring a weedeater out and scalp the 10 meter ring.

Nov 29 2002, 12:34 AM
sandles,

most courses never move baskets.


bb,

that is more information about goats than we probably need. :^p

Nov 29 2002, 09:04 AM
If stones are too large and permanent, you could always just line the circle with PEBBLES. /msgboard/images/clipart/happy.gif

Nov 29 2002, 03:27 PM
You will know be know as "OUTSIDE THIRTY JOHNSON". I you ask me if you are outside,when you are about 50 ft away,i'm going smack you and your goat!

snoophaney
Nov 29 2002, 04:59 PM
Just tie a string to the bottom of the pole hole. Then you can use it for ctp's and the 10 meter rule. A very inexpensive way to solve the problem.

wit
Nov 29 2002, 06:52 PM
i like the rock/brick thing... and the string attached to the basket sounds easy and economical. i have heard of people carrying a 10 meter string with a small hook on it and just hook it on the basket and measure.

sandalman
Nov 29 2002, 09:55 PM
that was funny mark! cant wait to make ya pay /msgboard/images/clipart/proud.gif

string thing sounds cools also...

www, sort of true, but since most course are on public parks, holes tend to move, albeit slowly, to accomodate changing patterns in park use.

anyway, i basically know nothing, and really just wanted to say i liked the circles, and hope more events give them a try.

rhett
Dec 02 2002, 12:55 AM
We just spray paint the grass with whatever we have. Environmental concerns? pshaw! Whaddya think we are, NorCal'ers??? /msgboard/images/clipart/proud.gif

<FONT SIZE="-2">we'd line 'em with old 55 gallon drums of PCBs if we hadn't already dumped it all in Arizona.</FONT>

gotcha
Mar 10 2008, 07:02 PM
The first course I played with 10-meter circles was Woodson Park in Oklahoma City. That was probably 1993 or 1994 during the Oklahoma Doubles Championships. Rather than use paint, some sort of grass/weed killer was used as all the circles were basically rings of dead grass. The 10-meter circle is a great idea and I wished more greens were marked that way.

Jroc
Mar 11 2008, 02:13 PM
Amarillo has painted 10m circles at their events since I have been playing them (5 years). I think its a very professional touch. We started painting 10m "dashed" circles at our events here. Paint on for 2 steps, paint off for 2 steps, etc. Uses half the paint...but still serves its purpose. Also, it is announced that the line is APPROXIMATE. So, if there are any questions about putting vs. jump putting...it needs to be measured.

Unless its obviously closer than 10m, most players around here will allow a jump putt.

5355
Mar 11 2008, 02:37 PM
How about invisible fencing at the 10 m mark and microchips on all discs used for putting that would signal whether or not it's acceptible for those avid putt-jumpers? :D

zbiberst
Mar 11 2008, 04:00 PM
i was hoping that your invisible fence suggestion would be followed with electric collars, so that if you jump put inside or over the 10m line you get shocked.

DiscHof
Mar 12 2008, 09:41 AM
i was hoping that your invisible fence suggestion would be followed with electric collars, so that if you jump put inside or over the 10m line you get shocked.



2nd

reallybadputter
Mar 12 2008, 06:44 PM
i was hoping that your invisible fence suggestion would be followed with electric collars, so that if you jump put inside or over the 10m line you get shocked.



2nd



And you have to hole out to shut the fence off... that way you're encouraged to go for the long putts since going to mark the drop in after the layup/miss will also be painful... :D

mgaffney
Mar 16 2008, 04:31 PM
one of the west side courses in phoenix used surveyors nails (big nails with plastic bristles attached). Be sure to drive them down so that the bristles are only 1 or 2 inches above the grass. This keeps mowers and people from pulling them out.
Gaff

mgaffney
Mar 16 2008, 04:45 PM
Oh, and I am the one who has done the rings at the Memorial for the last 8 years. I use striping paint, I get three holes per can if I walk fast. Lasts nearly two weeks. I use a paint stick with rubber coated cable preset to 32 ft 10 in. A quick clip with two wire clamps to set the proper distance. Have the cable 3 feet out the other side of the paint stick to pull on, this keeps tension on the wire making the circles accurate and saving your arm at the trigger of the paint stick.
Gaff

mpetre
Mar 18 2008, 11:25 AM
I ran a skills competition and used surveying flag/tape (you know the thin stuff used to mark trees and such. One roll covers each hole and at $1 a roll it's not a bad deal for 18 holes. I used the biggest U nails that I could find to hold it in the ground. This worked pretty well and was pretty easy to pull back up when the event was over. Takes some time (about 2-3 hrs to get it setup) but it really clearly defines the 10m circle and gives everyone something to shoot for on upshots.

virtualwolf
Apr 07 2008, 10:32 PM
I love the 10 meter circle too. Not enough tourneys do it though. I am putting a 30' string with a hook on it in my bag tonight....Love that idea!!!

the_kid
Apr 07 2008, 10:38 PM
I love the 10 meter circle too. Not enough tourneys do it though. I am putting a 30' string with a hook on it in my bag tonight....Love that idea!!!



Make sure it isn't a 30ft circle though! I have seen this done many times.

krupicka
Apr 07 2008, 10:39 PM
Methinks you need to get a longer string. 10m=32'10".

MikeMC
Apr 13 2008, 09:53 PM
You can use powder agricultural limestone or "lime" for marking the circle. It's cheap, readily available, and good for the environment. It's a naturally occuring mineral that is used to lower the PH/acidity in lawns which is a problem everywhere in the environment because of acid rain. It's a white powedery substance that looks like flour. Temporary but completely safe and good for the environment.